Products Categories
Contact

Hofmann (Beijing) Engineering Technology Co.,Ltd

Add:6F, East International Building, No.2 DongZhiMen Outside Street, DongCheng District, Beijing

Tel:+86-10-84479336

Fax:+86-10-84479336

Email:service@hfmphe.com

Web:www.hfmphe.com

Gasket for Hisaka Plate Heat Exchanger

HISAKA Plate Heat Exchanger is used in almost all process industries, as such the gaskets are specifically selected based on the operating condition. A wide range of gaskets are available such as NBR, EPDM, IIR, FPM, Silicon, etc. 1. VERSATILE GASKET • Special Hisaka (S-1) glue shall be applied...

Send Inquiry Chat Now

HISAKA Plate Heat Exchanger is used in almost all process industries, as such the gaskets are specifically selected based on the operating condition. A wide  range of gaskets are available such as NBR, EPDM, IIR, FPM, Silicon, etc.

1.  VERSATILE GASKET

• Special Hisaka (S-1) glue shall be applied for bonding

img04348.jpg

2.  GLUE-FREE GASKET SLIT-IN TYPE

These plate gaskets do not need adhesive. The slit-in gasket is especially recommended for those applications where fre- quent replacement of the gasket is  required. Further, without the adhesives, adhesive odor is reduced. This slit-in type gasket is suitable for such as water treatment Food application.

img23990.jpg

3.  PTFE CUSHION GASKET (TCG)

Through our own development, HISAKA has pioneered PTFE Cushion Gaskets for the Plate Heat Exchanger. It is normally used in applications where conventional  synthetic rubber would have limitations due to the corrosiveness of the fluid being handled. With this new development, the Plate Heat Exchangers can be applied in much wider field than before due to the chemical resistance  and the durability of PTFE.

img17576.jpg

• Special double adhesive tape shall be applied for bonding

Features 1. Excellent chemical resistance against most chemical especially organic solvent. 2. Due to the elastic core of the TCG gasket, it does not require  strong tightening torque during the assembly of the unit. Thus re- ducing the risks of plate deformation due to over tightening. 3. TCG gasket can be used for one side only, if the non-corrosive fluid is running in the other  side where conventional gasket can be used.

img20384.jpg

4.HFM offers gaskets for all Hisaka Plate Heat Exchanger models below.


LX-Series Models

LX00A

LX10A

LX20

LX20A

LX30A

LX40

LX40A

LX50A

LX00A

LX10A

LX20

LX20A

LX30A

LX40

LX40A

LX50A


 RX-Series Models

RX11A

RX13A

RX30A

RX70

RX11A

RX13A

RX30A

RX70


 EX-Series YX- Series Models

EX11

EX15

YX80

EX11

EX15

YX80


SX-Series Models

SX41

SX43

SX90

SX90M

SX41

SX43

SX90

SX90M


UX-Series Models

UX01

UX10

UX100

UX10A

UX20

UX20A

UX30

UX30A

UX40

UX40A

UX80

UX90

UX01

UX10

UX100

UX10A

UX20

UX20A

UX30

UX30A

UX40

UX40A

UX80

UX90



Hot Tags: gasket for hisaka plate heat exchanger, China, suppliers, manufacturers
Related Products

Copyright © Hofmann (Beijing) Engineering Technology Co.,Ltd All Rights Reserved.