Products Categories
Contact

Hofmann (Beijing) Engineering Technology Co.,Ltd

Add:6F, East International Building, No.2 DongZhiMen Outside Street, DongCheng District, Beijing

Tel:+86-10-84479336

Fax:+86-10-84479336

Email:service@hfmphe.com

Web:www.hfmphe.com

Gasket for Mueller Plate Heat Exchanger

Gaskets for Mueller plate heat exchangers are designed to positively locate in gasket grooves. The Lock-in gaskets speed the assembly process. They can be replaced during shutdown- saving time and money. And the Lock-in feature is available on most models. The materials of gaskets are Nitrile...

Send Inquiry Chat Now

Gaskets for Mueller plate heat exchangers are designed to positively locate in gasket grooves. The Lock-in gaskets speed the assembly process. They can be replaced during  shutdown- saving time and money. And the Lock-in feature is available on most models.

img27602.PNG

The materials of gaskets are Nitrile (NBR), Ethylene propylene rubber (EPDM), Silicone, Viton and Butyl (resin cured).

HFM offers gaskets for all Mueller Plate Heat Exchanger models below.

Mueller Accu-Therm - AT Series

AT-04P

AT-10

AT-1306

AT-1309

AT-130M

AT-161

AT-184FF

AT-192FF

AT04P

AT10

AT1306

AT1309

AT130M

AT161

AT184FF

AT192FF

AT 04 P

AT 10

AT 1306

AT 1309

AT 130 M

AT 161

AT 184 FF

AT 192 FF


AT-20P

AT-40

AT-40FF

AT-40L

AT-40M

AT-40P

AT-805

AT-80M

AT-20P

AT-40

AT-40FF

AT-40L

AT-40M

AT-40P

AT805

AT80M

AT 20 P

AT 40

AT 40 FF

AT 40 L

AT 40 M

AT 40 P

AT 805

AT 80 M

Advantage

1. Chemical resistance: Each rubber material has a specific chemical resistance. The polymers and additives used determine the rubber material suitable for a certain chemical medium. Holdi synthetic rubber material has *** suitable performance.

2. High temperature resistance: Under high temperature conditions, rubber materials are quickly damaged by chemical substances and environmental oxidation. The oxidation process hardens the rubber material (in most cases) or softens (in a few cases), or both. These two properties change the performance of the rubber material. All rubber materials have a continuous temperature limit, within which the rubber material will maintain good performance and a reasonable service life.

3. Low temperature resistance: Under low temperature conditions, the hardness of the rubber material increases and the elasticity decreases, which affects the sealing performance of the gasket. All rubber materials have a low temperature tolerance, no lower than *** low temperature, and the gasket can perform a good sealing function.

4. Food industry: The rubber materials used in the food production industry are required to meet the national food hygiene standards. International requirements for PHE gaskets for the food industry are usually FDA (US) standards that specify the additives and levels that are permitted. The standard also specifies the tests and tests that must be performed to confirm safety quality.

Hot Tags: gasket for mueller plate heat exchanger, China, suppliers, manufacturers
Related Products

Copyright © Hofmann (Beijing) Engineering Technology Co.,Ltd All Rights Reserved.