Products Categories
Contact

Hofmann (Beijing) Engineering Technology Co.,Ltd

Add:6F, East International Building, No.2 DongZhiMen Outside Street, DongCheng District, Beijing

Tel:+86-10-84479336

Fax:+86-10-84479336

Email:service@hfmphe.com

Web:www.hfmphe.com

Gasket for Sondex Plate Heat Exchanger

HFM offers gaskets for all Sondex Plate Heat Exchanger. The following types of packings are being used in our plate type heat exchangers: •Glue gaskets •"Sonder Snap" •"Sonder Lock" gaskets (new generation of gaskets) •"Hang-on" gaskets "Sonder Snap"...

Send Inquiry Chat Now

Principle

The gasket is mounted on the heat transfer plate to form a flow path that seals the fluid and does not leak to the outside. The number of heat transfer plates is determined by the amount of fluid, the physical properties of the fluid, and the pressure. Drops and hot conditions. The cover prevents the plate from being affected by the pressure difference. In the assembly of the plates, the surface with the washers points towards the fixed cover, with each plate alternately suspended in the opposite direction. The two fluids can then flow in their own area and transfer heat.

Advantage

Construct plates and plate patterns to achieve high thermal efficiency with low pressure drop

According to the given choice, there are two pattern designs with different pressing angles, giving high/low turbulent flow respectively.

The inlet channel allows maximum strength of the inlet area while maintaining a minimum contact point, reducing clogging in the flow distribution area

The inlet design ensures that the liquid is evenly distributed on the heated surface

The gasket is placed in a dedicated retaining washer groove. This ensures the elasticity of the gasket even after a long period of compression.

HFM offers gaskets for all Sondex Plate Heat Exchanger. The following types of packings are being used in our plate type heat exchangers:

•Glue gaskets

•"Sonder Snap"

•"Sonder Lock" gaskets (new generation of gaskets)

•"Hang-on" gaskets

图片1(001).jpg图片2.jpg图片3.jpg

"Sonder Snap" gasket           "Sonder Lock" gasket           "Hang-on"  gasket

The models below are for Sondex plate heat exchanger gasket replacement.

S4A

S7A

S8

S8A

S14A

S15

S19

S20

S20A

S21A

S22

S4-A

S7-A

S-8

S8-A

S14-A

S-15

S-19

S-20

S20-A

S21-A

S-22


S30

S35

S37

S38

S39

S43

S47

S50

S60

S-30

S-35

S-37

S-38

S-39

S-43

S-47

S-50

S-60


S61

S62

S64

S65

S72

S100

S121

S130

S152

S188

S-61

S-62

S-64

S-65

S-72

S-100

S-121

S-130

S-152

S-188


Hot Tags: gasket for sondex plate heat exchanger, China, suppliers, manufacturers
Related Products

Copyright © Hofmann (Beijing) Engineering Technology Co.,Ltd All Rights Reserved.